GOST R 55724-2013

ГОСТ Р 55724-2013

Non-destructive Testing. Welded Joints. Ultrasonic Methods

Контроль неразрушающий. Соединения сварные. Методы ультразвуковые

Status: Effective - Introduced for the first time. IUS 8-2014

This standard establishes the methods of ultrasonic testing of butt, corner, lap and tee joints with full penetration of the weld root made of arc, electroslag, gas, gas-press, electron-beam, laser and flash butt welding or their combinations in welded products made of metals and alloys for detection the following discontinuities: cracks, poor penetration, pores, non-metallic and metallic inclusions. This standard does not regulate the methods for determining the actual size, type and form of the identified discontinuities (defects) and does not apply to the control of anticorrosive surfacing. The need for and the amount of ultrasonic testing, the types and sizes of discontinuities (defects) to be detected are established in the standards or design documentation for products

Настоящий стандарт устанавливает методы ультразвукового контроля стыковых, угловых, нахлесточных и тавровых соединений с полным проваром корня шва, выполненных дуговой, электрошлаковой, газовой, газопрессовой, электронно-лучевой, лазерной и стыковой сваркой оплавлением или их комбинациями в сварных изделиях из металлов и сплавов для выявления следующих несплошностей: трещин, непроваров, пор, неметаллических и металлических включений. Настоящий стандарт не регламентирует методы определения реальных размеров, типа и формы выявленных несплошностей (дефектов) и не распространяется на контроль антикоррозионных наплавок. Необходимость проведения и объем ультразвукового контроля, типы и размеры несплошностей (дефектов), подлежащих обнаружению, устанавливаются в стандартах или конструкторской документации на продукцию

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: Federal Agency for Technical Regulation and Metrology, 11/8/2013

SKU: RUSS70030

Price: $140.58

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 19 Tests »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 038/2016 TR EAEU. About safety of rides » Regulations and standards (to 038/2016 TR EAEC) »

Standards for pipe fittings (TPA) » 10. Production » 10.6 Non-destructive testing »

ISO classifier » 19 TESTS » 19.100 Non-destructive testing »

National standards » 19 TESTS » 19.100 Non-destructive testing »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

The Document References:

GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements

GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.

GOST 15467-79: Product quality control. Basic concepts. Terms and definitions

GOST 18353-79: Non-destructive check. Classification of types and methods

GOST 18576-96: Non-destructive testing. Railway rails. Ultrasonic testing methods

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 23829-85: Acoustical non-destructive testing. Terms and definitions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST R 55725-2013: Non-destructive testing. Piezoelectric ultrasonic transducers. General technical requirements

GOST R 55808-2013: Non-destructive testing. Ultrasonic transducers. Test methods

GOST R 56542-2015: Non-destructive testing. Classification of types and methods

GOST R ISO 5577-2009: Non-destructive testing. Ultrasonic inspection. Vocabulary

SanPiN 2.2.4/ Hygienic requirements when working with sources of air and contact ultrasound for industrial, medical and household purposes

The Document is Referenced By:

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods

GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34011-2016: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 7370-2015: Railway frogs. Specifications

GOST R 50.05.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of welded joints and cladded surfaces

GOST R 50.05.03-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination and thickness measurement of monometal, bimetal, and corrosion-resistant cladding

GOST R 50.05.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of austenitic steel welded joints

GOST R 50.05.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of base materials (semi-products)

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications

GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 8.847-2013: State system for ensuring the uniformity of measurements. Ultrasonic pulse flaw detectors. Methods and means for verification

NP 105-18: Federal norms and rules in the field of the use of atomic energy "Rules for the control of metal equipment and pipelines of nuclear power plants in the manufacture and installation"

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines

SP 378.1325800.2017: Offshore pipelines. Design and construction rules

SP 46.13330.2012: Bridges and pipes

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 86.13330.2014: Main (Trunk) pipelines

GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules

GOST 34524-2019: Rails are railway. Non-destructive testing in operating conditions. General requirements

GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods

GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods

GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods

GOST R 50.05.13-2019: Conformity assessment system in the field of atomic energy use. Ultrasonic inspection of welded joints using phased array technology. Order of conduct

GOST R 50.05.18-2019: Conformity assessment system in the field of atomic energy use. Joints of welded parts from steels of various structural classes for equipment and pipelines of nuclear power plants. The procedure for ultrasonic testing

GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods

GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines

GOST R 58819-2020: Pipe fittings for trunk oil pipelines and oil product pipelines. Rules for assessing the technical condition and extension of assigned indicators

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

SDOS-11-2015: Guidelines on the procedure for conducting ultrasonic testing of metal structures of technical devices, buildings and structures

SP 129.13330.2019: External networks and water supply and sewerage facilities

SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

ST CKBA 125-2020: Pipe fittings. Types of control and testing

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20


MongoliaLaws.org is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!