GOST 13585-68

ГОСТ 13585-68

Steel. The bead method for determining the allowed welding and building procedures.

Сталь. Метод валиковой пробы для определения допускаемых режимов дуговой сварки и наплавки

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to steel and establishes a roller sample method for assessing changes in the mechanical properties of the base metal and microstructure caused by the thermal cycle of fusion arc welding, both directly in the weld heat affected zone (HAZ) area adjacent to the weld zone during welding, and in other HAZ sites .

Стандарт распространяется на стали и устанавливает метод валиковой пробы для оценки изменений механических свойств основного металла и микроструктуры, вызванных термическим циклом дуговой сварки плавлением как непосредственно в участке зоны термического влияния сварки (ЗТВ), примыкающем к зоне сплавления при сварке, так и в других участках ЗТВ.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Gosstandart of the USSR, 1/1/1968

SKU: RUSS21173

Price: $145.53



The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Surfacing »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »


The Document References:

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9450-76: Measurements microhardness by diamond instruments indentation

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Power transformers. Ability to withstand short circuit
Language: English
Price: $311.85
Petroleum products. Determination of sulfur content (lamp method)
Language: English
Price: $322.04
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29
Construction in seismic regions
Language: English
Price: $547.47
NCS of Republic of Uzbekistan certification for motor vehicles and trailers
Language: English
Price: $2,308.74
Liquid hydrocarbon fuels. Determination of the heat of combustion by bomb calorimeter (precision method)
Language: English
Price: $258.02
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39

YOUR ORDERING MADE EASY!

MongoliaLaws.org is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!