SNiP 3.03.01-87

СНиП 3.03.01-87

Bearing and enclosing structures

Несущие и ограждающие конструкции

Status: The document is not up to date. The current version of SP 70.13330.2012 is valid. Supporting and enclosing structures

The rules and regulations apply to the production and acceptance of work performed during the construction and reconstruction of enterprises, buildings and structures in all sectors of the national economy: in the construction of monolithic concrete and reinforced concrete structures of heavy, especially heavy, porous aggregates, heat-resistant and alkali-resistant concrete, with production of shotcrete and underwater concreting; in the manufacture of precast concrete and reinforced concrete structures in the construction site; when installing precast reinforced concrete, steel, wooden structures and structures made of lightweight efficient materials; when welding assembly connections of building steel and reinforced concrete structures, reinforcement joints and embedded products of monolithic reinforced concrete structures; during the construction of stone and reinforced stone structures made of ceramic and silicate bricks, ceramic, silicate, natural and concrete stones, brick and ceramic panels and blocks, concrete blocks

Нормы и правила распространяются на производство и приемку работ, выполняемых при строительстве и реконструкции предприятий, зданий и сооружений, во всех отраслях народного хозяйства: при возведении монолитных бетонных и железобетонных конструкций из тяжелого, особо тяжелого, на пористых заполнителях, жаростойкого и щелочестойкого бетона, при производстве работ по торкретированию и подводному бетонированию; при изготовлении сборных бетонных и железобетонных конструкций в условиях строительной площадки; при монтаже сборных железобетонных, стальных, деревянных конструкций и конструкций из легких эффективных материалов; при сварке монтажных соединений строительных стальных и железобетонных конструкций, соединений арматуры и закладных изделий монолитных железобетонных конструкций; при производстве работ по возведению каменных и армокаменных конструкций из керамического и силикатного кирпича, керамических, силикатных, природных и бетонных камней, кирпичных и керамических панелей и блоков, бетонных блоков

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 103

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 12/4/1987

SKU: RUSS19756

Price: $297.00


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 4. Security of capital construction objects » 4.1. Federal State Construction Supervision »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.060 Construction elements » 91.060.10 Walls. Partitions. Facades »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.01 Structures of buildings in general »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »


As a Replacement Of:

SN 383-67: Instructions for the production and acceptance of work in the construction of reinforced concrete tanks for petroleum and petroleum products

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SN 420-71: Instructions for sealing joints when erecting building structures

SNiP III-15-76: Concrete and reinforced concrete structures monolithic

SNiP III-16-80: Prefabricated concrete and reinforced concrete structures

SNiP III-17-78: Stone constructions

SNiP III-19-76: Wooden structures

The Document References:

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-78: Concrete. Methods for determining the compressive strength and tensile strength

GOST 10181.1-81: Concrete mixture. Test method of determination of workability

GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 10260-82: Crushed stone gravel for construction works. Specification

GOST 10268-80: Heavy concrete. Technical requirements for fillers

GOST 10690-73: Technical potassium carbonate (potash). Technical conditions

GOST 10906-78: Square taper washers. Specifications

GOST 10922-75: Reinforcement products and embedded parts, welded for reinforced concrete structures. Requirements and test methods

GOST 11159-76: Ferric chloride technical

GOST 11371-78: Washers. Specifications

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11991-83: Crushed stone and sand agloporitic. Specification

GOST 13830-68: Edible salt

GOST 14098-85: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, construction and dimensions

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 18105-86: Concretes. Rules for the strength control

GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans

GOST 18906-80: Spray-type driers. Type, basic parameters and dimensions

GOST 19345-83: Gravel and sand of light concrete. Specification

GOST 19906-74: Sodium nitrite technical. Technical conditions

GOST 2081-75: Carbamide

GOST 20850-84: Wooden laminated structures. General specifications

GOST 20910-82: Refractory concretes. Specifications

GOST 20955-75: Fillers for heat-resistant concrete. Classification and technical requirements

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 22236-85: Cements. Rules of acceptance

GOST 22237-85: Cements. Packing, labelling, transport and storage

GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements

GOST 22266-76: Sulphate resisting cements. Specifications

GOST 22355-77: Product grade C washes for high strength bolts. Construction and dimensions

GOST 2246-70: Welding steel wire. Specifications

GOST 22690.0-77: Heavy concrete. General requirements for methods for determining the strength without destroying, by the devices of mechanical action

GOST 22845-85: Electrical passenger and freight elevators

GOST 23464-79: Cements classification

GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements

GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24211-80: Concrete additives. Classification

GOST 25192-82: Concretes. Classification and general technical requirements

GOST 25346-82: Unified system of tolerances and seating fits. General provisions, series of tolerances and major deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 2544-76: Adhesives, cementing, lime-containing, for hydraulic use

GOST 25820-83: Lightweight concrete. Specifications

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 26873-86: Materials derived from screening of crushing of sedimentary rocks for construction works. Specification

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 3242-79: Welded joints

GOST 4111-74: Iron (III) nitric acid 9-water. Specification

GOST 450-77: Calcium chloride technical. Technical conditions

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 5802-86: Mortars. Test methods.

GOST 6318-77: Sodium sulfate technical. Technical conditions

GOST 6402-70: Lock washers. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7473-85: Ready-mixed concrete. Specification

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7566-81: Rolled stock and products for further treatment

GOST 8267-82: Crushed stone made from natural stone for construction works. Specification

GOST 8268-82: Gravel for construction work

GOST 828-77: Sodium nitrate technical. Technical conditions

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8736-85: Sand for construction work. Technical requirements

GOST 9087-81: Welding melted fluxes

GOST 9206-80: Diamond powders

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 969-77: Cement. Specification

GOST 9757-83: Fillers porous inorganic for lightweight concrete. General specifications

GOST 9758-86: Non-organic porous aggregates for construction work

GOST 9759-83: Expanded Clay Gravel And Sand Specifications

GOST 9760-86: Rubble and sand porous from metallurgical slag (slag pumice). Specification

SN 383-67: Instructions for the production and acceptance of work in the construction of reinforced concrete tanks for petroleum and petroleum products

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SN 420-71: Instructions for sealing joints when erecting building structures

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SNiP II-18-76: Foundations and foundations on permafrost soils. Design Standards

SNiP III-15-76: Concrete and reinforced concrete structures monolithic

SNiP III-16-80: Prefabricated concrete and reinforced concrete structures

SNiP III-17-78: Stone constructions

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

SNiP III-19-76: Wooden structures

The Document is Referenced By:

ERD 22-02-99: Guide to Operating Condition Assessment of Steel Crane Support Structures

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 25772-83: Steel guard railing of stairways, balconies and roofs. General specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52059-2003: Services. Services on the repairing and construction of the habitation and other buildings. General specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53254-2009: The firefighting equipment. Stationary external fire ladders. Buildings roof railings. General technical requirements. Test methods

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

Instruction 23-02: Instruction on transportation and pouring of concrete in monolithic constructions by means of transit concrete mixers and concrete pumpers

Manual: Manual for impulse and low consumption fire extinguishing systems

MDK 2-04.2004: Methodological manual for the maintenance and repair of housing

MDK 4-02.2001: Model Guidelines for Operation of Piped Heat Supply Networks of Public Piped Heat Supply Systems

MDK 4-04.2002: Model Guidelines for Operation of Hot Water Storage Tanks in Public Piped Heat Supply Systems

MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes

MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings

MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings

MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-39.2008: Recommendations for the preparation of a project for the installation of a panel high-rise building

MDS 12-40.2008: Recommendations for the preparation of a project for the installation of scaffolding

MDS 12-45.2008: Recommendations for drafting a project for the installation and operation of a tower crane

MDS 12-48.2009: Winter concreting with the use of heating wire

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

MDS 12-52.2009: In situ pile construction

MDS 12-57.2010: Installation of scaffolding on high-rise buildings. Project of work production

MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation

MDS 12-60.2011: Production design for installation of steel structures of buildings

MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities

MDS 13-17.2000: Recommended Practice for Correction of Violations in the Maintenance and Use of Public Housing and Premises Thereof

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MDS 13-22.2009: Methods of geodetic monitoring of the technical condition of high-rise buildings and unique buildings and structures

MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space

MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements

MDS 53-2.2004: Diagnostics of welded steel structures

MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat

MR 502.1-05: Guidelines for mounting connections on high-strength bolts coated with contact surfaces with friction primers in steel structures of bridges

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

NPB 245-2001: Fixed fire ladders to be installed outside buildings. Buildings roof railings. General technical requirements. Test methods

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.036-2013: Guidelines for the design, repair, maintenance and operation of ferries and floating bridges

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges

OSN-APK 2.10.01.001-04: Design of shallow-depth foundations of low-rise rural buildings on heaving soils

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 45.091.350-91: Occupational safety standards system. Metal masts and towers of radio enterprises. General safety requirements

R 78.36.035-2013: Recommendations for the organization of a comprehensive centralized protection of banking self-service devices

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RD 03-33-95: Guidelines for Supervision of Construction and Installation Practices at Nuclear and Radiation Hazardous Facilities

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-420-01: Guidelines for Inspection of Reinforced Concrete Tanks for Petroleum and Petroleum Products

RD 08-95-95: Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks

RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines

RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.

RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities

RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks

RD 153-34.0-20.507-98: Model Guidelines for Operation of Thermal Energy Transportation and Distribution Systems (Piped Heat Supply Networks)

RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2

RD 153-34.0-48.518-98: Rules of design, construction and operation of fibre-optics communication circuits (FOCC) by overhead power transmission lines (PTL) with voltage 110 kV and above.

RD 153-34.1-21.326-2001: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 1: Reinforced Concrete and Concrete Structures

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.126-94: Instructions for operational control of assembly processes, welding and heat treatment.

RD 34.20.504-94: Model Guidelines for Operation of Overhead Electric Power Transmission Lines at Voltage of 35-800 kV

RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation

RD 34.21.408-95: Guidelines for Acceptance of Smokestacks Under Construction

RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water

RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 78.36.006-2005: Choice and application of hardware of security and alarm systems and engineering safety measures for development of facilities

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants

Recommendations 102-04: Recommendations on concreting of the structures by means of concrete pump when transportation of concrete mixture by concrete mixer trucks

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I

RSN I-89: Recommendations for the use of concretes with complex antifrosty additives for monolithic structures erected in the Yakut ASSR at negative temperatures

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

SNiP 3.02.01-87: Earthen structures, foundation and basis

SNiP 3.04.01-87: Insulation and finishing coatings

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.06.06-88: Airports

SNiP 32-03-96: Aerodromes

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures

SP 120.13330.2012: Subway systems

SP 12-106-2004: Rules for the examination of the knowledge of welding production personnel for admission to welding work in the construction industry, building materials industry and housing and communal complex

SP 124.13330.2012: Heating networks

SP 126.13330.2012: Survey operations in construction

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 16.13330.2011: Steel structures

SP 22.13330.2011: Buildings and structures foundations

SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures

SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame

SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost

SP 32-105-2004: Subways

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 45.13330.2012: Earth structures, bases and foundations

SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 52-104-2006: Steel fibre reineorced concrete structures

SP 52-105-2009: Reinforced concrete structures in cold climates and on permafrost soils. (In the development of SNiP 52-01-2003 and SNiP 2.02.04-88)

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

SP 53-102-2004: General rules for steel structure design

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST-NP SRO SSK-04-2013: Temperature-strength control of concrete during the construction of monolithic structures in the winter

STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality

STO NAAG 3.1-2013: Designs using autoclaved aerated concrete in the construction of buildings and structures. Design and Construction Rules

TR 127-01: Technical recommendations on repair and restoration works of roads, sidewalks, platforms for various purposes with the complex improvement of courtyards

TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness

TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades

TR 154-04: Technical recommendations for improving the quality of finishing work

TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems

TR 172-05: Technical recommendations for the construction of urban roads with curved side stones

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 186-07: Technological regulations for the installation of waterproofing keys Aquastop when constructing and restoring waterproofing of deformation and technological joints of concrete in reinforced concrete structures of underground and submerged structures

TR 196-08: Technical recommendations on the technology of sealing and sealing joints of exterior wall panels

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 80-98: Recommended Practice for Concrete Laying Process by Unheated Method of Cast-in-Place Structures Using Thermos and Accelerated Thermos

TR 94.03.1-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 94.03.1: Installation of Precast Concrete and Reinforced Concrete Structures for Sub-Grade P

TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements

TR 94.04-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 04: Construction of Brick Buildings

TR 94.06-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 06: Finishing Work

TR 94.09-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 09: Thermal Insulation for Exterior Wall Panel Joints

TR 94.10-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 10: Sealing Joints in Exterior Building Enclosures

TR 95.06-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 06: Thermal Insulation of Joints of Exterior Wall Panels

TR 95.07-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 07: Sealing of Joints of Exterior Building Enclosures

TR 95.16-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 16: Standard Procedure for Installation of Suspended Ceilings and Partitions

TR 95.17-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures

TSN 31-323-2002: Underground constructions. In mining workings in the permafrost area

TSN 50-302-96: Construction of Foundations for Civil Buildings and Structures Located in the Metropolitan Area Administered by the City of St. Petersburg

TSN 50-303-99: Design and Installation of Shallow Foundations for Low-Rise Dwellings in the Moscow Region

TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

VSN 150-68: Technical guidelines for improving the frost resistance of concrete transport structures

VSN 150-93: Guidelines for the Improvement of Frost Resistance of Concrete Used in Transportation Construction

VSN 202-90: Guidelines for Erection of 22-Story Large-Panel Residential Buildings Assembled From Modular Preassembled Elements (KOPE-85), Erected by DSK-2

VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction

VSN 240-88: Process Guidelines for Waterproofing Type A Cast-In-Place Underground Structures Using Polyethylene Sheets

VSN 242-89: Guidelines for Technology for Sealing Joints of Exterior Wall Panels of Buildings for Utility, Amusement, Entertainment, and Recreation Purposes and Residential Buildings Using Products Manufactured by Mospromstroymaterialy PPO

VSN 311-89: Erection of Upright Cylindrical Steel Tanks With Capacities of 100 to 50,000 Cubic Meters for Storage of Petroleum and Petroleum Product

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

VSN 66-97: Instructions for arranging self-leveling screeds using dry cement-sand mixtures

VSN 9-94: Flooring Guidelines for Residential and Public Buildings

VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements

IG-93: Instructions for use, technical supervision, methods of audit, rejection and repair of wet gas tanks

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual for SNiP 2.06.08-87: A guide for the design of concrete and reinforced concrete structures of hydraulic structures (without prestressing)

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.21.521-91: Typical instructions for the technical operation of industrial buildings and structures of energy enterprises. Part 1. Organization of operation of buildings and structures

RD 34.21.621-95: Guidelines for straightening crane tracks in the main buildings of thermal power plants

RD 50:48:0075.05.07: Guidelines for the industrial safety expertise of buildings and structures with crane loads. Part I. General Provisions

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 471.1325800.2019: Building Information Modeling. Quality control of construction works

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

STN TsE 141-99: Design norms for contact network

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TSN 12-302-95 SO: Thermal insulation and sealing of joints of external walls and gaps between window and door blocks and a wall in residential and public buildings with polyurethane foam

TSN 12-303-95 SO: Thermal insulation of the floor of the first floor and floors over unheated rooms and driveways in residential and public buildings with polyurethane foam

TSN 12-304-95 SO: Thermal insulation of floors with polyurethane foam when combined roofing

TSN 12-305-95 SO: Thermal insulation of external walls of residential and public buildings with polyurethane foam

TSN 12-306-95 SO: Thermal insulation of floors in residential and public buildings with unheated attic polyurethane foam

TSN 12-308-97 SO: Window

TSN 12-316-2002: Acceptance and commissioning of completed construction of real estate. St. Petersburg

TSN 12-321-2003: Acceptance and commissioning of completed construction projects. Rostov region

TSN 12-325-2004: Acceptance and commissioning of completed construction projects. Smolensk region

TV 14-4-1: Issue 1.

VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

MongoliaLaws.org is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!