GOST 25706-83

ГОСТ 25706-83

Magnifiers

Лупы

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to general and industrial loupes.

Стандарт распространяется на лупы общего и промышленного назначения.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: Gosstandart of the USSR, 4/8/1983

SKU: RUSS16423

Price: $91.14




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.5 Optical and optical-mechanical devices, light and electron microscopes »

ISO classifier » 37 TECHNOLOGY OF RECEPTION OF IMAGES » 37.020 Optical equipment »

National standards » 37 TECHNOLOGY OF RECEPTION OF IMAGES » 37.020 Optical equipment »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P4 Optical and optomechanical devices, light and electron microscopes » P43 Light and electronic microscopes, telescopes, magnifiers and other magnifying devices »


As a Replacement Of:

GOST 10513-73: Watchmaking magnifier glass

GOST 18504-73: Magnifier for viewing frames on 35 mm film

GOST 7594-75: Magnifying glasses, folding, pocket

GOST 8307-72: Textile magnifying glasses

GOST 8309-75: Measuring magnifiers

GOST 9461-74: Measuring magnifiers for grain

The Document References:

GOST 11141-84: Optical parts. Classes of cleanness of optical surfaces. Methods of control

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 3514-94: Achromatic optical glass

The Document is Referenced By:

808-2017 PKB CV: Instructions for the maintenance of wagons in operation (Instructions for the inspector of wagons)

FR 1.31.2016.24509: Quantitative chemical analysis of water. Method for measuring the mass concentration of ethylene glycol and diethylene glycol in samples of natural and waste water by gas chromatography

FR 1.39.2007.03221: Biological control methods. Method of determining the toxicity of water and water extracts from the soil, sewage sludge, waste from mortality and changes in fertility of ceriodaphnias

FR 1.39.2007.03222: Biological control methods. Methodology for determining the toxicity of water and water extracts from soils, sewage sludge, waste by mortality and changes in the fertility of daphnia

FR 1.39.2007.03223: Biological control methods. Methods for determining the toxicity of water, water extracts from the soil, sewage sludge and waste by changing the level of chlorophyll fluorescence and the number of algae cells

GOST 10047-62: High speed steel cutting tools. Specifications

GOST 10083-81: Taper reamers with taper shank

GOST 10104-75: Technical 2, 4-dinitrotoluene. Specifications

GOST 10117.1-2001: Glass bottles for food liquids. General specifications

GOST 10117-91: Glass bottles for food liquids

GOST 10136-77: Diethyleneglycol. Specifications

GOST 10153-70: High refractory silicon carbide products. Specifications

GOST 10157-2016: Gaseous and liquid argon. Specifications

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 10164-75: Reagents. Ethylene glycol. Specifications

GOST 10205-73: Technical 2-aminotoluene. Specifications

GOST 10259-78: Reagents. Acetylacetone. Specifications

GOST 10285-81: Insert blanks for upsetting tools and insert blanks for parting blades made of cemented carbides. Specifications

GOST 10352-80: Refractories for ships' boiler furnaces. Specifications

GOST 10381-75: High-refractory mullite bricks for blast furnace bottom lining

GOST 10381-94: High-refractory mullite bricks for blast furnace bottom lining. Specifications

GOST 10437-80: Commercial furfural

GOST 10444.11-89: Food products. Methods for determination of the lactic acid bacteria

GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications

GOST 10673-75: T-slot cutters with hard metal tips. Specifications

GOST 10679-76: Liquefied hydrocarbon gases. Method for determination of the hydrocarbon compound

GOST 10733-79: Mechanical wrist and pocket watches

GOST 10733-98: Mechanical hand and pocket watches. General specifications

GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds

GOST 10853-88: Oil seeds. Methods of determination of infestation

GOST 10888-76: Periclasechromite refractories for the steel melting furnace roofs

GOST 10888-93: Periclasechromite refractories products for the steel melting furnace roofs. Specifications

GOST 10918-82: Micaceons plates and micaceons details. Test methods

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 10930-74: Reagents. Furfurol. Specifications

GOST 11007-66: Measuring tips of apparatus for linear measurements. Specifications

GOST 11103-2018: Inorganic glass and glass-ceramic materials. Heat resistance determination method

GOST 111-2001: Flat glass. Specifications

GOST 11125-84: Super pure nitric acid. Specifications

GOST 11141-84: Optical parts. Classes of cleanness of optical surfaces. Methods of control

GOST 111-90: Polished glass. Specifications

GOST 11235-2017: Phenol-formaldehyde resins. Methods for the determination of free phenol

GOST 11235-75: Phenolformaldehyde resins. Methods for determination of free phenol

GOST 11293-89: Gelatin. Specifications

GOST 11363-91: Technical dimethyl-terephthalate. Specifications

GOST 11586-69: Refractories for bottom pouring of steel. Specifications

GOST 11808-88: Synthetic latex БC-30. Specifications

GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications

GOST 12045-81: Seed of farm crops. Methods of determination for pest infestation

GOST 12063-75: School exercise books. Specification

GOST 12138-86: Diphenylolpropane for industrial use. Specifications

GOST 12167-82: Shuttleless looms with weft projectiles

GOST 12177-79: Cables, wires and cords. Methods of construction checking

GOST 12265-78: Rubber mold boots protecting from petroleum, petroleum products, and fats

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 12509-75: Carbide tipped counterbores. Technical requirements

GOST 12573-2013: Sugar. Method for determination of ferrous foreign matters

GOST 12573-67: Sugar. Method for determination of ferrous foreign matters

GOST 12794-80: Methyl chloride technical. Specifications

GOST 12844-74: Technical epichlorhydrine. Specifications

GOST 13.1.512-97: Reprography. Micrography. Readers. General specifications

GOST 13.2.001-2001: Reprography. Copyrography. Electrophotographic document copying machines. General technical requirements

GOST 13.2.001-80: Reprography. Copirography. Electrophotocopying reproduction machine. Types and main parameters

GOST 13.2.001-90: Reprography. Copyrography. Electrophotographic document copying machines. General technical requirements

GOST 13.2.007-88: Reprography. Copirography. Diazotype calgue. Specifications

GOST 13.2.008-87: Reprography. Copirography. Diazotype paper. Specifications

GOST 13006-67: State system for ensuring the uniformity of measurements. Angle meters. Verification method

GOST 13056.6-97: Seed of trees and shrubs. Methods for determination of germination

GOST 13056.8-97: Seed of trees and shrubs. Methods for determination of high quality

GOST 13309-79: Note-books. Specification

GOST 13309-90: Note-books

GOST 13340.2-77: Dried vegetables. Methods of determination of metal impurities and pests of cereal stocks

GOST 1336-77: Thread milling cutters. Specifications

GOST 13379-82: Petroleum. Determination of C1-C6 hydrocarbons by method of gas chromatography

GOST 13456-82: Dried beat-root cake for export. Specifications

GOST 13496.13-2018: Mixed feeds. Methods for determination of smell, infestation by cereal parasites

GOST 13496.9-96: Mixed feeds. Methods for determination of metallomagnetic impurity

GOST 13522-78: Synthetic latex ДMMA-65 ГП. Specifications

GOST 13525.13-69: Paper. Methods for determination of greaseproofness

GOST 13586.2-81: Grain. Methods for determination of foreign grain and specially counted foreign matter, small grains and grain size

GOST 13586.4-83: Grain. Methods for determination of infested grain and its damage

GOST 13586.6-93: Grain. Methods for determination of infested grain

GOST 13750-88: Micaceous plates for instrument-making. Specifications

GOST 13838-68: Fine-module disk gear-milling cutters

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 13979.4-68: Oilcakes, oilmeals and powdered mustard seed cake. Determination of color, odor, dark impurities and small particles of oilcake

GOST 13979.5-68: Oilcakes, oilmeals and powdered mustard seed cake. Determination of metal impurities

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14340.2-69: Enameled round wires. Methods of the adhesion test

GOST 14340.3-69: Enameled round wires. Methods of the flexibility test

GOST 14340.4-79: Enameled round winding wires. Method of the heat shock test

GOST 14340.8-69: Enameled round winding wires. Method of the solvent-, oil- and water resistance test

GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 14618.5-78: Essential oils, aromatics and their intermediates. Method of analysis by gas chromatography

GOST 14832-79: Refractory forsterite and forsteritechromite products. Specifications

GOST 14832-96: Refractory forsterite and forsteritechromite products. Specifications

GOST 14849-89: Macaroni foods. Acceptance rules and methods of quality determination

GOST 14862-76: Viscose yarn on sectional spools. Specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14920-79: Dry gas. Method for determination of component composition

GOST 14924-2019: Synthetic cis-butadiene rubbers. Technical conditions

GOST 14952-75: Combined centre drills. Specifications

GOST 14953-80: Taper countersinks

GOST 1505-81: Mouthpiece cigarette. General specifications

GOST 15080-77: Synthetic latex БC-50. Specifications

GOST 15113.2-77: Food concentrates. Methods for determination of impurities content and contamination of cereal reserves with pests

GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains

GOST 15130-86: Optical quartz glass

GOST 1523-81: Straight reamers

GOST 15489.1-93: Brown coals, hard coals, anthracite and combustible shales. Methods for VTI determination of coefficient of grindability

GOST 15627-2019: Synthetic butadiene-methyl styrene rubbers SKMS-30ARK and styrene butadiene SKS-30ARK. Technical specifications

GOST 15634.3-70: Magnet wire. Method of the bending test

GOST 15635-70: Refractory fire-clay products for hot-metal transfer ladles lining. Specifications

GOST 1566-96: Refractory silica products for electrical steel melting furnaces. Specifications

GOST 15820-82: Polystyrole and copolymers of styrole. Gas chromatographic method for determination of residual monomers and non-polymerizing impurities

GOST 15844-2014: Glass packaging for milk and dairy products. General specifications

GOST 15844-92: Glass bottles for milk

GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications

GOST 15902.2-2003: Nonwoven fabrics. Methods of determination of structural characteristics

GOST 1598-75: Fireclay refractory products for blast furnaces. Specifications

GOST 1598-96: Fireclay refractory products for blast furnaces. Specifications

GOST 16088-70: Solid carbide machine reamers. Specifications

GOST 16336-2013: Polyethylene compositions for cable industry. Specifications

GOST 16336-77: Polyethylene compositions for cable industry. Specifications

GOST 16337-77: High-pressure polyethylene. Specifications

GOST 16338-85: Low-pressure polyethylene. Specifications

GOST 16398-81: Calenderer vinyl plastic film. Specifications

GOST 16463-2016: Solid carbide keyway cutters. Specifications

GOST 16483.18-72: Wood. Method for determination the number of annual rings in 1 cm and content of latewood in an annual ring

GOST 16485-87: Dimethyldichlorsilan purified. Specifications

GOST 16491-80: Keyway broaches

GOST 1663-2016: Glasses for liquid level indicators. Specifications

GOST 1677-75: Solid counterbores and high steel inserted blade counterbores. Technical requirements

GOST 1695-80: Solid shell-type face mills, side mills and slot mills

GOST 17024-2015: End mills. Specification

GOST 17024-82: End mills

GOST 17082.4-88: Fruits of ethereal-oil crops. Industrial raw material. Methods for determination of odour and pest contamination

GOST 1723-2015: Fresh onion for industrial processing. Specifications

GOST 17277-71: Solid carbide twist drills. Specifications

GOST 17342-81: Knives for chipping machines

GOST 17445-80: Commercial hexachlorobenzene

GOST 1750-86: Dried fruits. Acceptance rules, methods of testing

GOST 17716-2014: Mirrors. General specifications

GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications

GOST 18064-72: Solid carbide boring tools with steel shank. Specifications

GOST 18324-73: Ionizing radiation source units for radioisotope instruments of relay type

GOST 18372-73: Carbide end mills. Specifications

GOST 18479-73: Planer-type circular saws for sawing of wood. Technical conditions

GOST 18491-90: Spectacle frames for corrective eye glasses

GOST 18963-73: Drinking water. Methods of sanitary-bacteriological analysis

GOST 18995.6-73: Organic chemical products. Methods for determination of boiling point

GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications

GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses

GOST 19671-91: Tungsten wire for light sources

GOST 19710-83: Ethylene glycol. Specifications

GOST 19711-74: Enamelled rectangular winding wires. Method of the flexibility test

GOST 19785-88: Cathode-ray tubes for reception. Methods for measurement and control of parameters

GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications

GOST 20015-88: Chloroform. Specifications

GOST 20239-74: Flour, grouts and bran. Determination method of metallomagnetic admixture

GOST 20288-74: Reagents. Carbon tetrachloride. Specifications

GOST 2034-80: Twist drills

GOST 20491-75: Technical isopropylbenzene. Specifications

GOST 20568-75: Rubber masks for submarine swimming

GOST 2060-2006: Brass rods. Specifications

GOST 2060-90: Brass rods. Specifications

GOST 20698-75: Twist drills for hard to machine materials. Specifications

GOST 20843.1-89: Coal tar phenol products. Gas chromatographic method for determination of composition of phenol, o-cresol

GOST 20843.2-89: Coal tar phenol products. Gas chromatographic method for determination of composition of dicresol, triczesol and xylenols

GOST 20901-75: Refractory and high-refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications

GOST 21000-81: Non-strengthened and strengthened fluoroplast sheets laminated with foil. Specifications

GOST 21237-75: Meat. Methods of bacteriological analysis

GOST 21436-75: Refractory and highly-refractory articles for the lining of rotary furnaces. Specifications

GOST 21443-75: Liquefied hydrocarbon gases for export

GOST 21469-82: Drawing tools and sets thereof. Specification

GOST 21533-76: Wood chemical products. Method of test by gas chromatography

GOST 21542-76: Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21545-76: Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21546-88: Hammer dies for die forging

GOST 21643-82: Mechanical surgical suturing devices

GOST 2168-83: Technical dimethylaniline. Specifications

GOST 21765-76: Self-opening threadcutting die heads with circular. Technical conditions

GOST 21820.3-76: Cotton seed. Methods for determination of impurities, mechanical damage, residual fibrousnesses, residual pubescence and burning

GOST 21836-88: Sight glasses for industrial units. Specifications

GOST 2187-79: Diving weights. Specifications

GOST 21903-76: Paint materials. Methods of relative light-fastness determination

GOST 22053-76: Woodcutting twist drills with centre and undercutters. Specifications

GOST 22057-76: Woodcutting twist drills. Technical conditions

GOST 2222-95: Technical methanol. Specifications

GOST 22300-76: Reagents. Ethyl acetate and butyl acetate. Specifications

GOST 22442-77: Refractory articles for stabilizing gas burner chambers. Specifications

GOST 2248-80: Flat thread-rolling dies

GOST 22524-77: Glass density bottles. Specifications

GOST 22707-77: Technical methyl bromide. Specifications

GOST 22749-77: Form-relieved milling cutters

GOST 2287-88: Flat thread chasers

GOST 23001-88: Propylene oxide technical. Specifications

GOST 23053-78: Baddeleyite-corundum refractories for the glass-making. Specifications

GOST 23249-78: End cutters for use on NC machine tools for machining parts of high-resistant steels, titanium and light alloys. Specifications

GOST 23342-2012: Architectural-building goods of the natural stone. Specifications

GOST 23487-79: Technical 2-nitrotoluene. Specifications

GOST 23492-2019: Synthetic butadiene-methylstyrene rubbers SKMS-30ARKPN and styrene-butadiene rubbers SKS-30ARKPN. Technical conditions

GOST 23492-83: Synthetic rubbers, butadiene-styrene CKC-30APKПН and butadiene-methyl styrene СKMС-30APKПН. Specifications

GOST 23519-93: Technical synthetic phenol. Specifications

GOST 23644-79: Gaseous nitrogen concentrated by stable isotope Nitrogen-15. Specifications

GOST 23683-89: Hard petroleum paraffines

GOST 23781-87: Natural combustible gases. Chromatographic method for determination of component composition

GOST 23844-79: Khladon 113. Specifications

GOST 2386-73: Level vials. Specifications

GOST 23932-79: Laboratory glassware and equipment. General technical requirements

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 23999-80: Fodder calcium phosphate

GOST 24006-80: Alcohols fatty. Method for determination of fraction composition by gas chromatography

GOST 24045-86: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications

GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 24360-80: Shell-type face mills with inserted carbide teeth

GOST 24676-81: Pentanes. Method for determination of the hydrocarbon compounds

GOST 24704-81: Mullite-silica, mullite, mullite-corundum and corundum refractory articles. Specifications

GOST 24704-94: Corundum and high alumina refractory products. Specifications

GOST 24849-2014: Water. Methods of sanitary-bacteriological analysis for field conditions

GOST 24849-81: Potable water. Field methods of sanitary and microbiological analysis

GOST 24906-81: Gear-shaping cutter heads for straight bevel gears

GOST 24933.1-81: Seed of flowers. Methods for determination of purity and seed lot impurity

GOST 24933.2-81: Seed of flowers. Methods for determination of germinating ability and germinative energy

GOST 24975.1-89: Ethylene and propylene. Chromatographic methods of analysis

GOST 25101-82: Milk. Method for determination of the freezing point

GOST 25219-87: Synthetic fatty acids. Methods for determination of fractional composition by gas chromatography

GOST 25266-82: Ethylamine technical. Method of determination of the appearance

GOST 25311-82: Feeding flour of animal origin. Methods for bacteriological analysis

GOST 25559-82: Liquid petroleum paraffin. Method for determination of impurities content and calculation of n-alkenes content

GOST 25593-83: Diamond pastes

GOST 25742.4-83: Methanol poison, technical. Gas chromatographic method of ethyl alcohol determination

GOST 25945-87: Polymer building non-hardening sealing materials and products. Test methods

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 2603-79: Reagents. Acetone. Specifications

GOST 26101-84: Welding powdered wire

GOST 26149-84: Sheet floor covering on the base of chemical fibres. Specifications

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 26312.3-84: Groats. Method for determination of pest infestation

GOST 26312.4-84: Groats. Methods for determination of grain size, admixture content and sound kernels

GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications

GOST 26596-91: Non-adjustable milling cutters

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26624-2016: 2-Ethylhexanol technical. Specifications

GOST 26641-85: Non-traumatizing needles

GOST 2679-2014: Slitting and cutting cutters. Specifications.

GOST 2679-93: Metal slitting and cutting-off saws

GOST 26968-86: Sugar. Methods of microbiological analysis

GOST 26972-86: Corn, flour, grouts and oatmeal for children's food. Methods of microbiological analysis

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 27014-86: Wood protective. Method for determining wood permeability

GOST 27037-86: Paint materials. Method of determination of stability to temperature changes

GOST 2706.2-74: Benzene hydrocarbons and allied products. Chromatographic method of determination of main substance and impurities content in benzene, toluene and xylene

GOST 27266-87: Molybdenum wire for light sources

GOST 27543-87: Confectionery. Equipment, materials, reagents and culture media for microbiological analyses

GOST 27544-87: Liquid-in-glass thermometers. General specifications

GOST 27559-87: Flour and bran. Method for determination of pest infestation and filth test

GOST 27597-88: Electronics items. Corrosion resistance evaluation method

GOST 27636-95: Stone extraction and processing equipment

GOST 2768-84: Acetone technical. Specifications

GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates

GOST 27785-88: Biological dry compounds. Method of determination of oxygen content in bottles of compound

GOST 28067-89: Elements and articles of wood and wooden materials. Method for determining contact thermal resistance of protective and decorative coatings

GOST 28143-89: Vinyl artificial leather for footwear. Type NT. General specifications

GOST 28144-89: Synthetic leather on non-woven sheet for footwear uppers. General specifications

GOST 28178-89: Fodder yeast. Test methods

GOST 28250-89: High-impact polystyrene. Specifications

GOST 28281-89: Side milling cutter for cutting of sprocket teeth for driving roller and sleeve-type chains

GOST 28420-89: Plant quarantine. Methods of entomology estimation of storage products

GOST 28436-90: End mills with mechanically clamped insrtr tips

GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts

GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications

GOST 28468-90: Refractory products for electric-arc steel-melting furnace lining. Specifications

GOST 28469-90: Wooden laminated sleepers and cants for tram lines. Specifications

GOST 2848-75: Tapers of tools. Tolerances. Methods and means of control

GOST 28498-90: Liquid-in-glass thermometers

GOST 28568-90: Synthetic rubbers. Method for determination of ionol - the phenol-type stabilizer content

GOST 28574-2014: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 28637-90: Bristle brush articles. Check methods

GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts

GOST 28719-90: Shell-type helical-flute cylindrical face milling cutters with replaceable carbide inserts

GOST 28762-90: Replaceable cutting inserts in superhard materials

GOST 28812-90: Coke chemical pyridine-base products. Gas chromatographic method for determination of component composition

GOST 28875-90: Spices. Acceptance and methods of analysis

GOST 28916-91: Fountain-pens. General technical requirements and test methods

GOST 28950-91: Drawing instruments. General technical requirements and test methods

GOST 28960-91: Furfurol alcohol. Specification

GOST 28995-91: Liquefied anhydrous ammonia for industrial use. Determination of water content. Gas chromatographic method

GOST 29039-91: Technical oleic acid. Acceptance rules and test methods

GOST 29092-91: Cylindrical milling cutters

GOST 29104.3-91: Industrial fabrics. Method for determination of number of yarns per 10 cm of woven cloth

GOST 29104.7-91: Industrial fabrics. Methods for determination of mesh sizes

GOST 29309-92: Coating of lacquers and paints. Determination of strength under the tension

GOST 3.1127-93: The unified system of technological documentation. General rules for drawing up of textual technological documents

GOST 30028.2-93: Wood-protecting preparations. Container method testing way protective ability to wood-colouring and moulding fungus

GOST 30089-93: Vegetable oils. Method for determination of erucic acid

GOST 30141-94: Coal-tar oils. Gas chromatographic determination of basic component composition

GOST 3022-80: Technical hydrogen. Specification

GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification

GOST 30246-94: Continuously rolled sheet steel with paint coating for Building

GOST 302-79: Medical maximum glass thermometer. Specifications

GOST 30351-2001: Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography

GOST 30407-2019: Glass dishes for food and drinks. General specifications

GOST 30418-96: Vegetable oils. Method for determination of fatty acid content

GOST 30483-97: Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30629-99: Cladding materials and products made of natural stone. Test methods

GOST 307.1-95: Electric irons for every day use

GOST 30705-2000: Infant milk products. Method for determination of the total amount of mesophilic aerobic and elective anaerobic bacteria

GOST 30706-2000: Infant milk products. Method for determination of yeasts and moulds quantity

GOST 30712-2001: Products of non-alcoholic industry. Methods of microbiological analysis

GOST 30713-2000: Polyacrylonitrile fibre. Determination of the concentration of acrylonitrile migration in air. Method of gas chromatography

GOST 30733-2000: Hard coat low emissivity glass. Specifications

GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand

GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces

GOST 30779-2014: Laminated windows. The method of evaluation of durability

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 31364-2007: Soft coating low emissivity glass. Specifications

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 313-77: Aniline for industrial use. Specifications

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31466-2012: Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles

GOST 31484-2012: Mixed feeds, protein-vitamin-mineral concentrates, рremixes. Methods for determination of metallomagnetic impurity

GOST 31516-2012: Medical maximum glass thermometrs. General specifications

GOST 31578-2012: Dental water-based cements. Technical requirements. Test methods

GOST 31589-2012: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST 31619-2012: Implantable mammary prostheses. General technical requirements. Test methods

GOST 31646-2012: Cereals. Method for determination of scabby kernels content

GOST 31693-2012: Cosmetics for nails care and make-up. General specifications

GOST 31964-2012: Macaroni products. Acceptance rules and methods of quality determination

GOST 32018-2012: Road-construction goods of natural stone. Specifications

GOST 32130-2013: Glass jars for food products of fishing industry. Specifications

GOST 32131-2013: Glass containers for alcohol and non-alcohol food products. General specifications

GOST 32149-2013: Food products of commercial poultry eggs processing. Microbiological analysis methods

GOST 32198-2013: Product for reproduction. Semen. Microbiological analysis technique

GOST 32277-2013: Product for reproduction. Semen. Physical, biological, biochemical, morphological analysis technique

GOST 32280-2013: Glass and glass products. Methods for determination of mechanical properties. Determination of resistance to static load

GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins

GOST 32357-2013: Glass and glass products. Test method boiling (temperature resistance)

GOST 32384-2013: Acetic acid. Gas chromatographic determination in atmospheric air

GOST 32405-2013: Solid hardmetal end mills. Specifications

GOST 32557-2013: Glass and glass products. Inspection methods for geometric parameters and appearance

GOST 32565-2013: Safety glass for ground vehicles. General specifications

GOST 32566-2013: Glass and glass products. Test method of bullet resistance

GOST 32671-2014: Glass containers for baby`s nutrition. General specifications

GOST 32687-2014: Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Specifications

GOST 3272-2002: Aluminosilicate refractories for lining of cupola furnaces. Specifications

GOST 32723-2014: Automobile roads of general use. Natural and crushed sand. Determination of mineralogical and petrographic composition

GOST 3272-71: Fireclay and semiacid refractories for lining of cupola furnaces. Specifications

GOST 32854-2014: Nail cosmetics for modeling and polishing. General specifications

GOST 32861-2014: Automobile roads of general use. Rubble and sand slag. Determination of content of weak grains and metal impurities

GOST 32901-2014: Milk and milk products. Methods of microbiological analysis

GOST 32918-2014: Petroleum. Method for determination of hydrogen sulphide, methyl- and ethylmercaptans

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 32956-2014: Public roads. Trays for road drainage. Methods of control

GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods

GOST 32999-2014: Glass and glass products. Salt spray resistance test method

GOST 33026-2014: Public roads. Rubble and gravel from rocks. Determination of the content of clay in lumps

GOST 33031-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Determination of the mineralogical-petrographic composition

GOST 3303-82: Rubber hot-water bottles

GOST 33050-2014: Public roads. Rubble and gravel from rocks. Determination of rock and rubble reactivity (gravel)

GOST 33051-2014: Public roads. Rubble and gravel from rocks. Determination of crushed grains in the gravel and rubble from gravel

GOST 33054-2014: Public roads. Rubble and gravel from rocks. Determination of grains of soft rock in the rubble (gravel)

GOST 3306-88: Square mesh screens made of corrugated steel wire

GOST 33088-2014: Glass and glass products. Humidity resistance test method

GOST 33089-2014: Glass and glass products. Test method for resistance to UV-radiation

GOST 33095-2014: Protective decorative coatings for wood furniture. Classification and designation

GOST 33124-2014: Laminated veneer lumber. Specifications

GOST 33145-2014: Public roads. Road mirrors. Methods of control

GOST 33214-2015: Polymeric and combined means of closing for perfumery cosmetic production. General specifications

GOST 33379-2015: Organic fertilizers. Methods for determining the presence of pathogenic and potentially pathogenic microorganisms

GOST 3339-74: Woven wire screen "(No Suggestions)"

GOST 33415-2015: Glass packaging. Souvenir bottles. General specifications

GOST 33455-2015: Plant quarantine. Methods of detection and identification of California scale

GOST 33456-2015: Plant quarantine. Methods of detection and identification of white peach scale

GOST 33463.6-2016: Life support systems on railway rolling stock. Part 6. Methods of hygienic assessment of the water supply system

GOST 33529-2015: Band saws with cutting elements, welded stellate. Specification

GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification

GOST 33536-2015: Confectionery. Method for quantity determination of mesophilic aerobic and facultative-anaerobic microorganisms

GOST 33538-2015: Plant protection. Methods of detection and count of lesions on grains of cereal cultures caused by Eurygaster bugs

GOST 33562-2015: Fresh garlic. Specifications

GOST 33566-2015: Milk and dairy products. Determination of yeast and mould

GOST 33568-2015: Milk and dairy products. Methods for determination of salt-tolerant bacteria

GOST 33690-2015: Petroleum and petroleum products. Determination of hydrogen sulphide, methyl- and ethylmercaptans by gas chromatography method

GOST 33716-2015: Blanks of boxes and packs. Boxes and packs. Technical specifications

GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking

GOST 33748-2016: Aluminium cans of deep drawing with easy open end. General specifications

GOST 33789-2016: Tobacco and tobacco products. Determination of the width of the shredded tobacco fiber

GOST 33805-2016: Packing of glass for food vinegars and acids. General specifications

GOST 33811-2016: Packing of glass for perfume and cosmetic products. General specifications

GOST 34036-2016: Glass packaging of glass mass for medicines. General technical conditions

GOST 34037-2016: Glass packaging for chemical reagents and superpure substances. General specifications

GOST 34101-2017: Posuda stal'naya emalirovannaya dlya detej i podrostkov. Tehnicheskie usloviya

GOST 34130-2017: Dried fruits and vegetables. Test methods

GOST 34165-2017: Cereals, legumes and their products. Methods for determining contamination by pests

GOST 34202-2017: Carbide burrs Technical conditions

GOST 34306-2017: Fresh onion. Technical conditions

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 3449-84: Taps. Specifications

GOST 34664-2020: Thermite-welded railroad rails. Specifications

GOST 34665-2020: Electro-welded railway rails. Specifications

GOST 34-83: Post envelopes. Specifications

GOST 3521-81: Optical glass. Method for determination of unstriae

GOST 3522-81: Optical glass. Method for determination of bubbles

GOST 3818.1-72: Linter. Test methods

GOST 3826-82: Wire cloth nets with square mesh. Specifications

GOST 390-83: General-purpose refractory fire-slay articles

GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications

GOST 3910-75: Refractory silica products for brickwork of glassmaking furnaces. Specifications

GOST 3934-2018: Aircraft wood. Inspection rules and control methods

GOST 3935-81: Cigarettes

GOST 4047-82: Rim saws for metal cutting

GOST 4157-79: Silica brick refractories. Specifications

GOST 422-75: Rubber for shoes bottom. Methods of tests for repeated flexing

GOST 4288-76: Culinary products and half-finished products of minced meat. Rules of acceptance and test methods

GOST 4601-73: Steel wire tweel mesh cloth with square apertures

GOST 4686-2012: Brake beams of brake leverage gear. Specifications.

GOST 4689-94: Periclase refractories. Specifications

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 4-84: Carbon tetrachloride for industrial use. Specifications

GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications

GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications

GOST 5208-2013: Technical normal butyl alcohol. Specifications

GOST 5208-81: Technical normal butyl alcohol. Specifications

GOST 530-2007: Ceramic bricks and stones. General specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 5341-98: Alumino-silicate refractories for linings of steel-teeming ladles. Specifications

GOST 5381-93: High refractory chromepericlase products. Specifications

GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications

GOST 5500-75: High-duty and refractories for steel pouring. Specifications

GOST 5524-75: Saws for vertical gang mills

GOST 5541-2002: Cork means of closing. General specifications

GOST 5541-2019: Cork closures. General specifications

GOST 5635-2018: Glass diffusers for ground vehicle lighting and light signalling apparatus. Specifications

GOST 5635-80: Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5717.1-2003: Glass jars for canned food. General specifications

GOST 5717.1-2014: Glass containers for cannеd food products. General specifications

GOST 5717-91: Jars for preserved food

GOST 5735-81: Carbide tipped machine reamers. Specifications

GOST 5756-81: Carbide tipped twist drills

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 5826-78: Reagents. M-phenylendiamin. Specifications

GOST 5851-75: Reagents. Tribrommethane. Specifications

GOST 5855-78: Reagents. N,N-dimethylanyline. Specifications

GOST 5901-2014: Confectionery. Methods for determination of ash and metal magnetic admixture mass fraction

GOST 5901-87: Confectionery. Methods for determination of ash and metallomagnetic admixture content

GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications

GOST 6006-78: Reagents. 1-Butanol. Specifications

GOST 6016-77: Reagents. Isobutyl alcohol. Specifications

GOST 6227-80: Taper-thread taps

GOST 6228-80: Round screw dies for taper thread

GOST 6323-79: Polyvinyl chloride insulated cables

GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications

GOST 6413-77: Benzoic acid for industrial use. Specifications

GOST 646-84: Technical chlorobenzene. Specifications

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6482-88: Reinforced concrete non-pressure pipes

GOST 6599-76: Technical dinitronaphthalene. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 6810-2002: Wallpaper. Specifications

GOST 6810-86: Wallpaper

GOST 6943.6-79: Glass textile products. Methods of density and non-inflamability determination

GOST 7151-74: Refractory alumino-silicate block products for glassmaking furnaces. Specifications

GOST 7370-2015: Railway frogs. Specifications

GOST 7392-2014: Crushed stone of solid rocks for ballast layer of rail ways. Specifications.

GOST 7484-78: Ceramic face bricks and stones. Specifications

GOST 7568-88: Ethylene oxide. Specifications

GOST 7702.2.0-2016: Products of poultry slaughter, semi-finished products from poultry meat and objects of the surrounding production environment. Sampling methods and preparing for microbiological examinations

GOST 7702.2.1-2017: Poultry slaughter products, poultry products and objects of the surrounding production environment. Methods for determining the number of mesophilic aerobic and facultative anaerobic microorganisms

GOST 7823-2000: Pipe tobacco. General specifications

GOST 7823-82: Pipe tobacco

GOST 7934.5-74: Watch oils and greases. Method for the determination of corrosion activity

GOST 7983-99: Toothpastes. General specifications

GOST 8.215-2019: State system for ensuring uniformity of measurements. Flat glass plates for interference measurements. Verification Method

GOST 8.229-2013: State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure

GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods

GOST 8.250-77: State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means

GOST 8.338-2002: State system for ensuring the uniformity of measurements. Thermoelectric transducers. Verification procedure

GOST 8.338-78: State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thermometers. Methods and means of verification

GOST 8.528-85: State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure

GOST 8.548-86: State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification

GOST 8034-76: Small spiral drills with diameter from 0,1 to 1,5 mm and thickened cylindrical tails. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8313-88: Technical ethylcellosolve. Specifications

GOST 8502-88: Difluorochloromethane (khladon 22). Specifications

GOST 8502-93: Difluorochloromethane (khladon 22). Specifications

GOST 8543-71: Slotting relieved milling cutters. Specifications

GOST 8570-80: Disk shavers

GOST 858-2000: Fine-cut smoking tobacco. General specifications

GOST 858-81: Tobacco

GOST 8699-76: Cigars

GOST 8735-88: Sand for construction work. Testing methods

GOST 8756.18-2017: Canned food. Methods for determining the appearance, tightness of the package and the state of the inner surface of the package

GOST 8781-71: Low-temperature clock oils. Specifications

GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking

GOST 8894-2018: Glass pipes. Specifications

GOST 8988-77: Rapeseed oil

GOST 8994-80: Wood-cutting cylindrical end milling cutters

GOST 9.026-74: Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone and thermolightozone resistance

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.066-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9.803-88: Unified system of corrosion and ageing protection. Fungicides. Efficiency determining method

GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test

GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST 9140-78: Keyway cutters. Specifications

GOST 9225-84: Milk and milk products. Methods of microbiological analysis

GOST 9286-89: Pentaerythritol for industrial use. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 9305-2014: Profile convex, concave milling and corner rounding cutters. Specifications

GOST 9305-93: Convex and concave form half-round milling cutters and corner rounding cutters

GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification

GOST 9324-80: Finishing single-thread hobs for involute spur-wheels

GOST 9357-95: Electric shavers

GOST 9371-90: Timber laminated switch sleepers for wide rail track. Specifications

GOST 9385-2013: Technical ethyl benzene. Specifications

GOST 9385-77: Ethyl benzene technical. Specifications

GOST 9422-83: Post cards

GOST 9480-2012: Plates facing from a natural stone. Technical conditions

GOST 9536-2013: Technical isobutyl alcohol. Specifications

GOST 9536-79: Isobutyl alcohol. Specifications

GOST 9539-72: Thread rolls. Specifications

GOST 9585-77: Acetaldehyde technical. Specifications

GOST 9590-76: Laminated paper decorative plastic. Specifications

GOST 9627.2-75: Glued plywood. Method for determination of heat resistance

GOST 9740-71: Circular screw dies. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests

GOST 9778-78: Film covered paper bookbinding material. Method of determination of abrasion resistance

GOST 9779-77: Binding material with film coating. Method for determination of stability to multiple bending

GOST 9805-84: Isopropyl alcohol. Specifications

GOST 980-80: Flat ring saws for wood sawing

GOST 9949-76: Coal xylene. Specifications

GOST 9967-74: Technical dimethylamine. Specifications

GOST 9976-94: Technical trichloroethylene. Specifications

GOST 9991-74: Technical hexachlorethane. Specifications

GOST R 13.1.107-2005: Reprography. Micrography. Microforms of archival documents. General specifications

GOST R 33.1.02-2008: United Russian insurance fund of documentation. Insurance copies of cinemadocumentation and photodocumentation. General specifications

GOST R 50.05.08-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control

GOST R 50054-92: Bridge timbers laminated beams. Specifications

GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications

GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications

GOST R 50301-92: Diphtorochloromethane (khladon 22). Specifications

GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications

GOST R 50396.0-2013: Poultry meat, edible offal and semi-prepared products from poultry meat. Sampling methods and preparing for microbiological examinations

GOST R 50396.1-2010: Poultry meat, edible offal and ready-to-cook poultry meat. Method for quantity determination of mesophilic aerobic and facultative-anaerobic microorganisms

GOST R 50569.2-94: Dental rotary instruments. Diamond instruments. Specifications. Test methods

GOST R 50802-95: Petroleum. Method for determination of hydrogen sulphide, methyl- and ethylmercaptans

GOST R 51104-97: Exported liquefied hydrocarbon gases from Russian region. Specifications

GOST R 51136-2008: Protective laminate glass. General specifications

GOST R 51136-98: Protective laminate glass. General specifications

GOST R 51194-98: Brushes of electrical machines. Methods of dimensions examination

GOST R 51477-99: Glass containers for chemical reagents and superpure substances. Specifications

GOST R 51507-99: Post cards. Technical requirements. Control methods

GOST R 51521-99: Refrigerants, propellants, production in aerosol packing and polymer materials. Test methods of ozone destroying substances

GOST R 51577-2000: Liquid oral hygiene products. General specifications

GOST R 51640-2000: Glass containers for goods of household chemistry. Specifications

GOST R 51744-2001: Dental water-based cements. Technical requirements. Test methods

GOST R 51756-2001: Aluminium cans of deep drawing with easy open end. Specifications

GOST R 51758-2001: Nutrient media for veterinary purposes. Methods of biological testing

GOST R 51781-2001: Glass containers for perfumery and cosmetic products. General specifications

GOST R 51822-2001: Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids

GOST R 51916-2002: Cereals. Method for determination of scabby kernels content

GOST R 51921-2002: Food products. Methods for detection and determination of Listeria monocytogenes bacteria

GOST R 51932-2002: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST R 51968-2002: Domestic vacuum flasks with glass fills. General specifications

GOST R 51969-2002: Kitchen utensils from special domestic glass. General specifications

GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins

GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications

GOST R 52223-2004: Steel enamelled ovenware with anti-burn coating. Specifications

GOST R 52223-2018: Enamelled steel cookware with non-stick coating. Technical specifications

GOST R 52327-2005: Glass containers for children's food. Specifications

GOST R 52377-2005: Macaroni products. Acceptance rules and methods of quality determination

GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications

GOST R 52574-2006: Technical and denatured synthetic ethyl alcohol. Specifications

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52617-2006: Glass containers for milk and milk products. Specifications

GOST R 52701-2006: Cosmetics for nails care and make-up. General specifications

GOST R 52711-2007: Manufacturing of juice products. Microbiological control methods using special microbiological nutrient media

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52780-2007: Hardmetal burrs. Specifications

GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST R 52897-2007: Glass jars food products of fishing industry. Specifications

GOST R 52898-2007: Glass bottles for food acetic acid and food vinegars. Specifications

GOST R 52913-2008: Polished diamonds. Classification. Technical requirements

GOST R 52921-2008: Medical maximum glass thermometers. General specifications

GOST R 53000-2008: Implantable mammary prostheses. General technical requirements. Test methods

GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST R 53004-2008: T-slot cutters. Specifications

GOST R 53011-2008: Mixed feeds, protein-vitamin-mineral concentrates, premixes. Methods for determination of metallomagnetic impurity

GOST R 53411-2009: Saw blades for metal cutting. Specifications

GOST R 53412-2009: Woodruff keyseat cutters. Specifications

GOST R 53416-2009: Glass containers for medicines. General specifications

GOST R 53430-2009: Milk and milk products. Methods of microbiological analysis

GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process

GOST R 53599-2009: Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles

GOST R 53767-2010: Polymeric and combined means of closing for perfumery cosmetic production. General specifications

GOST R 53921-2010: Glass containers for alcohol and non – alcohol food products. General specifications

GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications

GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications

GOST R 53944-2010: Food products of commercial poultry eggs processing. Microbiological analysis methods

GOST R 54002-2010: Organic fertilizers. Methods for determination of weed infestation

GOST R 54109-2010: Secure technologies. Security printing products. General technical requirements

GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications

GOST R 54161-2010: Mirrors. General specifications

GOST R 54163-2010: Glass and glass products. Test method for resistance to climatic exposure. Frost resistance test method

GOST R 54170-2010: Clear flat glass. Specifications

GOST R 54171-2010: Laminated glass. Specifications

GOST R 54172-2010: Sealed insulating glass units. Method of life cycle determination

GOST R 54176-2010: Soft coating low emissivity glass. Specification

GOST R 54177-2010: Hart coat low emissivity glass. Specifications

GOST R 54178-2010: Soft coating solar protection or decorative glass. Specifications

GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications

GOST R 54181-2010: Glass and glass products. Test method for resistance to humidity

GOST R 54182-2010: Glass and glass products. Salt spray test method

GOST R 54183-2010: Glass and glass products. Test method for resistance to UV-radiation

GOST R 54470-2011: Glass containers for canned food products. General specifications

GOST R 54489-2011: Circular saws for cutting logs machines and automatic lines. General technical requirements

GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications

GOST R 54543-2011: Exercise-books. General specifications

GOST R 54653-2011: Organic fertilizers. Methods of microbiological analysis

GOST R 54748-2011: Crushed stone from rocks for railway ballast. Specifications

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54901-2012: Dried beet pulp. Specifications

GOST R 54936-2012: Implants for surgery. End expanders. General technical requirements. Test methods

GOST R 55066-2012: Butadiene-1,3. Specifications

GOST R 55081-2012: School pupil's mark pokes. Specifications

GOST R 55262-2012: Dry machines and installing the agricultural purpose. Methods of testing

GOST R 55400-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of flexibility at low temperatures

GOST R 55401-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of dimensional stability

GOST R 55432-2013: Turn blades for machining wood materials and plastics. Technical requirements

GOST R 55909-2013: Fresh garlic. Specifications

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56139-2014: Functional foods. Methods for detection and enumeration of probiotic microorganisms

GOST R 56145-2014: Functional foods. Methods for microbiological analysis

GOST R 56712-2015: Panel multilayer polycarbonate. Specifications

GOST R 57019-2016: Artificial leather upholstery. General specifications

GOST R 57020-2016: Artificial leather for shoes. General specifications

GOST R 57107-2016: Specialized food products. Order to the detection and identification of nanomaterials in plants

GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process

GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57221-2016: Nutrient yeast. Test methods

GOST R 57243-2016: Furfuryl alcohol. Specifications

GOST R 57252-2016: Technical furfural. Specifications

GOST R 57650-2017: Microbiological products. Cormobacterinum. Specifications

GOST R 57755-2017: Polymer composites. Prepregs. Determination of the degree of fibre wetting

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58257-2018: Trunk pipeline transport of oil and oil products. Fabric ballasting devices. General specifications

GOST R 58402.3-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determining the content of crushed grains in gravel crushed stone

GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process

GOST R 58756-2019: Polymer multilayer domes. Technical specifications

GOST R 58809.2-2020: Photovoltaic modules. Safety assessment. Part 2. Test methods

GOST R 58872-2020: Marine cable lugs with flat clamping part for conductors up to 16 mm2. Technical requirements

GOST R 8.657-2009: State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure

GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure

GOST R 9.414-2012: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

MI 02-00: Methods of the Institute. Reiki leveling. Methods of verification

MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification

MI 1585-86: Guidelines. GSE. Device type 2URI. Method of verification

MI 1725-87: Methodical instructions. GSI. Spring measuring heads with a division price of 0.05 and 0.02 mm. Verification Method

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1748-87: State system for ensuring uniformity of measurements. Capillary glass viscometers. Method of verification

MI 1780-87: Guidelines. GSOEI. Tape exemplary and metal measuring tapes. Method of verification

MI 1795-87: Patterns of travel control KSH gauge 1520 mm. Control method

MI 1801-87: Methodical instructions. State system for ensuring uniformity of measurements. Electric recorders for linear measurements. Verification Method

MI 1825-88: Guidelines. GSE. Measuring projectors. Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 1988-89: Guidelines. State system for ensuring uniformity of measurements. Zubomer. Model 23900. Method of verification

MI 2077-90: Micrometers with inserts

MI 2078-90: Wires and rollers

MI 2131-90: Goniometers with nonius

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2196-92: Depth gauges

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 253-87: Guidelines. State system for ensuring uniformity of measurements. Object micrometers OMO, WMD. Method of verification

MI 2782-03: Recommendation. State system for ensuring uniformity of measurements. Thermometers mercury and alcohol meteorological. Verification Method

MI 2877-2004: Recommendation. State system for ensuring uniformity of measurements. Pneumatic anemometer type PO-30. Method of verification

MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification

MI 485-84: Guidelines. Microsyringe "Gazokhrom 101". Methods and means of verification

MI 936-85: Guidelines. State system for ensuring uniformity of measurements. Measures the length of the stroke model of the 3rd category (meters-comparators). Method of verification

MI 955-85: GSE. Digital raster system for linear measurements. Models 19000, 19001. Method of verification

MU 0397-00.004: Methods of conducting non-destructive testing of parts of the boiler installation PPUA-1600/100

MU 0397-00.005: Methods of conducting non-destructive testing of parts of KTGU type keys

MU 0397-00.006: Non-Destructive Testing Technique for the A-50U Tack Block

MU 0397-00.007: Methods of non-destructive ultrasonic testing of elevators ETA, EHL, KM

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 1002-00.004: Methods of conducting non-destructive ultrasonic testing of steam double-drum boilers of the type DE and Е-1-9

MU 1198-00.002: Methods of non-destructive ultrasonic testing of the weld zone of drill pipes of the TBPV type

MU 1198-00.003: Method of non-destructive ultrasonic testing of the crown block UKB-6-200

MU 1198-00.006: Method of conducting non-destructive testing of the pulley block

MU 1198-00.007: Method of nondestructive testing of hook blocks and lifting hooks

MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells

MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology

MU 1198-00.010: Method for the non-destructive testing of shaft shaft winch LV-15

MU 1198-00.011: PBC-4 key non-destructive testing procedure

MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels

MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C

MU 1798-00.003: Methods of conducting non-destructive ultrasonic inspection of parts of the column head

MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation

MU 3.5.1.3439-17: Evaluation of the sensitivity to disinfectants of microorganisms circulating in medical organizations

MU 4206-86: Guidelines for gas chromatographic measurement of butoxybutenin concentrations in the air of the working area

MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700

MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL

MU 4296/755-00.021: Methods for conducting non-destructive ultrasonic testing of a tube block furnace PTB-10

MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun

MU 5918-91: Guidelines for gas chromatographic measurement of concentrations of tetrafluorochloroethylene (M4), hexafluoropropylene (M6), trifluorochloroethylene (VPС1) in the air of the working area

MU 5985-91: Methodological guidelines for gas chromatographic measurement of concentrations of 2-methyl-1, 3-dioxolane (acetal) in the air of the working area

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

MUK 4.1.0.368-96: Gas chromatographic measurement of concentrations of methylphosphonic acid (hexaran) di- (2-ethyl) hexyl ester in the air of the working area

MUK 4.1.0.437-96: Gas chromatographic measurement of chrysanthemic acid methyl ester concentrations in the working area air

MUK 4.1.0.462-96: Gas chromatographic measurement of the concentration of 1, 2-epoxy-octene-7 in the air of the working area

MUK 4.1.0.472-96: Gas Chromatographic Measurement of Concentration of Dihydrolinanool Acetate (Acetate 3,7-dimethyl-6-en-1-in-3-ol) in Workplace Air

MUK 4.1.0.473-96: Gas Chromatographic Measurement of Concentration of Acetate 3,7-Dimethyloctadiene-1,6-ol-3 in Workplace Air

MUK 4.1.0.487-96: Gas chromatographic measurement of concentration of isobutylbenzene in the air of the working zone

MUK 4.1.0.488-96: Gas Chromatographic Measurement of Concentration of Valeric Acid and Caproic Acid Isobutyl Esters (42:58% Mixture) (Isobutyl Valerate, Isobutyl Caproate) in Workplace Air

MUK 4.1.0.517-96: Gas chromatographic measurement of the concentrations of terpinyl acetate (8-Acetoxy-p-ment-1-en) in the air of the working area

MUK 4.1.1042-01: Gas chromatographic determination of naphthalene in the air

MUK 4.1.1045-01: High-Performance Liquid Chromatography for the Determination of Formaldehyde and Irreducible Aldehydes (C2-C10) in Air

MUK 4.1.1051-01: Gas Chromatographic Determination of Thiamine Chloride in Air

MUK 4.1.1052-01: Gas chromatographic determination of tocopherol acetate in the air

MUK 4.1.122-96: Recommended practice for gas chromatographic measurement of concentrations of dimethyl ethers of adipic, glutaric and succinic acids in the air of the working zone

MUK 4.1.1585-03: Guidelines for gas chromatographic measurement of concentrations of 0, 0-dimethylmethylphosphonate (metharan) in the air of the working area

MUK 4.1.1629-03: Measurement of mass concentrations of 1,1-difluoroethylene in working zone area by gas chromatography

MUK 4.1.1733-03: Gas chromatographic measurement of mass concentrations of ethyl tert-butyl ether (ETBE) in the air of the working area

MUK 4.1.2104-06: Determination of the mass concentration of copper, magnesium, cadmium in urine samples by atomic absorption spectrometry

MUK 4.1.2105-06: Determination of the mass concentration of manganese, lead, magnesium in hair samples by atomic absorption spectrometry

MUK 4.1.2106-06: Determination of the mass concentration of manganese, lead, magnesium in blood samples by atomic absorption spectrometry

MUK 4.1.2107-06: Determination of the mass concentration of phenol in biological media (urine) by gas chromatography

MUK 4.1.2108-06: Determination of the mass concentration of phenol in biological media (blood) by gas chromatography

MUK 4.1.2109-06: Determination of the mass concentration of 2-chlorophenol in biological media (urine) by gas chromatography

MUK 4.1.2110-06: Determination of the mass concentration of formaldehyde, acetaldehyde, propionic aldehyde, butyraldehyde and acetone in urine samples by high performance liquid chromatography

MUK 4.1.2112-06: Determination of the mass concentration of chloroform, 1, 2-dichloroethane, carbon tetrachloride, chlorobenzene in biological media (blood) by gas chromatography

MUK 4.1.2113-06: Determination of the mass concentration of chloroform, 1, 2-dichloroethane, carbon tetrachloride in biological media (urine) by gas chromatographic analysis of an equilibrium vapor

MUK 4.1.2114-06: Determination of the mass concentration of chloroform, 1, 2-dichloroethane, carbon tetrachloride, chlorobenzene in biological media (urine) by gas chromatography

MUK 4.1.2115-06: Determination of the mass concentration of chloroform, 1, 2-dichloroethane, carbon tetrachloride in biological media (blood) by gas chromatographic analysis of an equilibrium vapor

MUK 4.1.2116-06: Determination of the mass concentration of styrene in blood samples by high performance liquid chromatography

MUK 4.1.556-96: Sanitary and chemical control in the production of polyurethane foams

MUK 4.1.580-96: Gas chromatography determination of acrylic acid nitrile released from polyacrylonitrile fiber into the air

MUK 4.1.600-96: Methodological guidelines for gas chromatographic determination of acetone, methanol and isopropanol in atmospheric air

MUK 4.1.616-96: Guidelines for the gas chromatographic determination of monobasic carboxylic acids in atmospheric air

MUK 4.1.620-96: Methodological guidelines for gas chromatographic determination of methyl acrylate in atmospheric air

MUK 4.1.623-96: Guidelines for the gas chromatographic determination of methyl and ethyl mercaptans in atmospheric air

MUK 4.1.648-96: Guidelines for the gas chromatographic determination of aniline and o-toluidine in water

MUK 4.1.656-96: Methodological guidelines for gas chromatographic determination of methyl acrylate and methyl methacrylate in water

MUK 4.1.662-97: Methodological guidelines for determination of mass concentration of styrene in atmospheric air by gas chromatography method

MUK 4.1.769-99: Quantitative determination of formaldehyde in the urine by high performance liquid chromatography

MUK 4.1.770-99: Quantitative determination of formaldehyde in blood by high-performance liquid chromatography

MUK 4.1.771-99: Gas chromatography determination of concentrations of methyl, ethyl, isopropyl, propyl, isobutyl and butyl alcohols in urine

MUK 4.1.772-99: Gas chromatographic determination of concentrations of methyl, ethyl, isopropyl, propyl, isobutyl and butyl alcohols in the blood

MUK 4.1.833-99: Methodological guidelines for gas chromatographic measurement of methyl mercaptan concentrations in the working area air

MUK 4.1.835-99: Guidelines for gas chromatographic measurement of the concentrations of methyl trichloroacetic ester in the air of the working area

MUK 4.1.902-99: Methodological guidelines for gas chromatographic measurement of the concentrations of dimethyl sulfide, dimethyl disulfide, methylthiopropionic aldehyde in the air of the working area

MUK 4.1.903-99: Guidelines for gas chromatographic measurement of the concentration of diphenylchloromethane (benzhydryl chloride) in the air of the working area

MUK 4.1.912-99: Methodological guidelines for gas chromatographic measurement of concentrations of 2-methyl-3-carbethoxy-5, 6-dihydropyran in the air of the working area

MUK 4.1.995-00: Gas chromatographic method for measuring concentrations of trifluoromethanesulfonyl fluoride in atmospheric air

MUK 4.1.997-00: Gas chromatographic method for measuring the concentration of trifluoromethanesulfonic acid and its anhydride in atmospheric air

MUK 4.2.1054-01: Measurement of concentrations of microorganisms-producers, bacterial preparations and their components in the atmospheric air of populated areas

MUK 4.2.1767-03: The method of microbiological measurement of the concentration of Aspergillus awamori cells VNIIgenetika 120/177-producer of glucoamylase in the atmospheric air of populated areas

MUK 4.2.1768-03: Microbiological method for measuring the concentration of Aspergillus terreus 44-62 cells producing lovastatin in ambient air in populated areas

MUK 4.2.1769-03: Microbiological method for measuring the concentration of Bacillus subtilis 65 microorganism cells producing neutral proteinase and amylase in the ambient air of populated areas

MUK 4.2.1770-03: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis 72-producer of alkaline protease in the atmospheric air of populated areas

MUK 4.2.1771-03: A method of microbiological measurement of the concentration of cells of the microorganism Bacillus subtilis 103 (H-15) -producer of neutral protease in the atmospheric air of populated areas

MUK 4.2.1772-03: Microbiological method of measuring the concentration of cells of the microorganism Bacillus licheniformis 1001-producer of bacitracin in the ambient air of populated areas

MUK 4.2.1773-03: Microbiological method for measuring the concentration of Candida tropicalis Y-456 cells producing xylitol in the atmospheric air of populated areas

MUK 4.2.1775-03: Microbiological method for measuring the concentration of cells of the microorganism Trichoderma viride 44-11-62/3-producer of a complex of cellulolytic enzymes in the atmospheric air of populated areas

MUK 4.2.1776-03: The method of microbiological measurement of the concentration of Aspergillus awamori cells VNIIgenetics 120/177 - producer of glucoamylase in the air of the working area

MUK 4.2.1777-03: A method of microbiological measurement of the concentration of cells Aspergillus terreus 44-62 - producer of lovastatin in the air of the working area

MUK 4.2.1778-03: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis 65 - producer of neutral protease and amylase in the air of the working area

MUK 4.2.1779-03: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis 72 - producer of alkaline protease in the air of the working area

MUK 4.2.1780-03: The method of microbiological measurement of the concentration of cells of the microorganism Bacillus subtilis 103 (H-15) - a producer of neutral protease in the air of the working area

MUK 4.2.1781-03: Microbiological method of measuring the concentration of cells of the microorganism Bacillus licheniformis 1001 - producer of bacitracin in the air of the working area

MUK 4.2.1782-03: Microbiological method of measuring the concentration of cells of the microorganism Candida tropicalis Y-456 - producer of xylitol in the air of the working area

MUK 4.2.1783-03: Microbiological method of measuring the concentration of cells of the microorganism Penicillium canescens F-832 - a producer of xylanase in the air of the working area

MUK 4.2.1784-03: The method of microbiological measurement of the concentration of cells of the microorganism Trichoderma viride 44-11-62/3 - producer of a complex of cellulolytic enzymes in the air of the working area

MUK 4.2.2217-07: Detection of Legionella pneumophila bacteria in environmental objects

MUK 4.2.2234-07: Microbiological measurement of the concentration of mold fungus cells Penicillium canescens PlPh33 - producer of pectin lyase and phytase in the air of the working area

MUK 4.2.2235-07: Microbiological measurement of the concentration of mold fungus cells Penicillium canescens PlPh33 - producer of pectin lyase and phytase in the atmospheric air of populated areas

MUK 4.2.2236-07: Microbiological measurement of the concentration of Bacillus licheniformis 103 cells - producer of alpha-amylase in the atmospheric air of populated areas

MUK 4.2.2237-07: Microbiological measurement of the concentration of Bacillus licheniformis 103 cells - producer of alpha-amylase in the air of the working area

MUK 4.2.2426-08: Microbiological method of measuring the concentration of cells of the microorganism Acinetobacter species JN-2 (drug destroil) in the atmospheric air of populated areas

MUK 4.2.2427-08: Microbiological method of measuring the concentration of cells of the microorganism Acinetobacter species JN-2 (Destroil preparation) in the air of the working area

MUK 4.2.2656-10: Microbiological method for measuring the concentration of conidia of Aspergillus niger VKPM F-171 producer strain citrate in air in the working area

MUK 4.2.2715-10: Microbiological method for measuring the concentration of yeast fungus cells Yarrowia lipolytica VKPM Y-3323 - producer of lipase in the atmospheric air of populated areas

MUK 4.2.2716-10: Method for microbiological measurement of the concentration of the producer strain of butanol, Closridium acetotobullum 3108 in the air of the working zone

MUK 4.2.2717-10: Method of microbiological measurement of cell concentration of B. licheniformis VKPM B-9608 - protease producer in the air of the working area

MUK 4.2.2718-10: Method of microbiological measurement of the concentration of cells B. amyloliquefaciens VKPM B-10291 - producer of alpha-amylase in the air of the working area

MUK 4.2.2720-10: The method of microbiological measurement of the concentration of cells of B. licheniformis VKPM B-9608 - a protease producer in the atmospheric air of populated areas

MUK 4.2.2721-10: Method of microbiological measurement of the concentration of B. amyloliquefaciens VKPM B-10294 cells - producer of alpha-amylase in the atmospheric air of populated areas

MUK 4.2.2725-10: Microbiological method of measuring the concentration of yeast fungus cells Yarrowia lipolitica VKPM Y-3323 - a producer of lipase in the air of the working area

MUK 4.2.2726-10: Method of microbiological measurement of the concentration of the producer strain of butanol, Closridium acetotoTylisum 3108 in the atmospheric air of populated areas

MUK 4.2.2769-10: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis Ch-13 in the atmospheric air of populated areas

MUK 4.2.2770-10: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis Ch-13 in the air of the working area

MUK 4.2.2884-11: Methods of microbiological control of environmental objects and food products using petrilar

MUK 4.2.2901-11: Microbiological method of measuring the concentration of cells of the microorganism Bacillus subtilis 26D - the main active ingredient of the drug Fitosporin-M in the air of the working area

MUK 4.2.2902-11: Method of microbiological measurement of the concentration of cells of the microorganism Bacillus subtilis 26D - the main active ingredient of the drug Fitosporin-M in the atmospheric air of populated areas

MUK 4.2.3032-12: Microbiological method for measuring the concentration of mold of the fungus Penicillium verruculosum PV2007 VKM F-3972D - producer of carbohydrase complex in the working area air

MUK 4.2.3033-12: Microbiological method for measuring the concentration of mold of the fungus Penicillium verruculosum PV2007 VKM F-3972D - producer of carbohydrase complex in the atmospheric air of populated areas

MUK 4.2.3034-12: Microbiological methods for measuring the concentration of cells of the mycelium fungus Trichoderma longibrachiatum TW-420 BKM F-3880D - producer of cellulases, beta-glucanase and xylanase in the atmospheric air of populated areas

MUK 4.2.3035-12: Microbiological methods for measuring the concentration of cells of the mycelium fungus Trichoderma longibrachiatum TW-420 BKM F-3880D - producer of cellulases, beta-glucanase and xylanase in the air of the working area

MUK 4.2.3248-14: Microbiological measurement of the concentration of the cells of the microorganism Rhodococcus jialingiae 1kp VKPM Ac-1957 in the air of the working area

MUK 4.2.3249-14: Microbiological measurement of the concentration of Rhodococcus jialingiae 1 kp VKPM Ac-1957 in the atmospheric air of populated areas. Methodical instructions

MUK 4.2.3250-14: Microbiological measurement of the concentration of Azotobacter chroococcum

MUK 4.2.3251-14: Microbiological measurement of the concentration of Azotobacter chrooccum BH-1811 VKPM B-9029 in the atmospheric air of populated areas. Methodical instructions

MUK 4.2.3252-14: Microbiological measurement of the concentration of Bacillus mucilaginosus Vas-10 VKPM B-8966 in the air of the working area

MUK 4.2.3253-14: Microbiological measurement of the concentration of Bacillus mucilaginosus Bac-10 VKPM-8966 in the atmospheric air of populated areas. Methodical instructions

MUK 4.2.3254-14: Microbiological measurement of the concentration of Lysinibacillus xylanilyticus 5 rb VKPM B-11685 in the working area air

MUK 4.2.3255-14: Microbiological measurement of the concentration of L. xylanilyticus 5 rb VKPM B-11685 in the atmospheric air of populated areas. Methodical instructions

MUK 4.2.3256-14: Microbiological measurement of the concentration of cells of the microorganism Yarrowia lipolytica 2kp VKPM Y-4043 in the air of the working area

MUK 4.2.3257-14: Microbiological measurement of the concentration of Yarrowia lipolytica 2kp VKPM Y-4043 in the atmospheric air of populated areas. Methodical instructions

MUK 4.2.3380-16: Microbiological measurement of concentration of Pseudomonas aureofaciens VKM-2391D in air of working area

MUK 4.2.3381-16: Microbiological measurement of concentration of Pseudomonas aureofaciens VKM-2391D in atmospheric air of populated areas

MUK 4.2.3382-16: Microbiological measurement of concentration of strain Bacillus amyloliquefaciens OPS-32 in air of working area

MUK 4.2.3383-16: Microbiological measurement of concentration of strain Bacillus amyloliquefaciens OPS-32 in atmospheric air of populated areas

MUK 4.2.3384-16: Microbiological measurement of concentration of Komagataella (Pichia) pastoris VKPM Y-4225 in air of working area

MUK 4.2.3385-16: Microbiological measurement of concentration of Komagataella (Pichia) pastoris VKPM Y-4225 in air of working area

MUK 4.2.3433-17: Microbiological measurement of concentration of Beijerinckia fluminensis Bf 2806 VKPM B-12258 in air of working area

MUK 4.2.3434-17: Microbiological measurement of concentration of Beijerinckia fluminensis Bf 2806 VKPM B-12258 in atmospheric air of populated areas

MUK 4.2.3435-17: Microbiological measurement of the concentration of Paenibacillus mucilaginosus Pm 2906 VKPM B-12259 in the air of the working area

MUK 4.2.3436-17: Microbiological measurement of concentration of Paenibacillus mucilaginosus Pm 2906 VKPM B-12259 in atmospheric air of populated areas

MUK 4.2.3437-17: Microbiological concentration measurement of Trichoderma asperellum OPF-19 in air of working area

MUK 4.2.3438-17: Microbiological measurement of Trichoderma asperellum OPF-19 concentration in atmospheric air of populated areas.

MUK 4.2.3526-18: Method for microbiological measurement of the concentration of Bacillus thuringiensis ssp. toumanoffi 25 in the air of the working area

MUK 4.2.3527-18: Method for microbiological measurement of the concentration of Bacillus thuringiensis ssp. toumanoffi 25 in the atmospheric air of populated areas

MUK 4.2.3528-18: Method for microbiological measurement of the concentration of Corynebacterium glutamicum H150 (Brevibacterium flavum) VKPM B-12692 in the air of the working area

MUK 4.2.3529-18: Method of microbiological measurement of Corynebacterium glutamicum (Brevibacterium flavum) H150 VKPM B-12692 in the atmospheric air of populated areas

MUK 4.2.3530-18: Method of microbiological measurement of the concentration of Beauveria bassiana ORV-43 in the air of the working area

MUK 4.2.3531-18: Method of microbiological measurement of the concentration of Beauveria bassiana ORV-43 in the atmospheric air of populated areas

MUK 4.2.3567-19: Method of microbiological measurement of the concentration of Komagataella (Pichia) pastoris BRTs VKPM Y-4394 in the air of the working area

MUK 4.2.801-99: Methods for the microbiological control of perfumery and cosmetic products

MVI 02-2000: Gas chromatographic method for measuring the mass concentration of aliphatic alcohols (methanol, ethanol, propanol-1, propanol-2, butanol-1, butanol-2, isobutanol) in industrial emissions using a universal disposable sampler

MVI.MN 1489-2001: Method for performing measurements of benzo (a) pyrene concentrations in water by liquid chromatography

ODM 218.3.006-2011: Methods for Calculating Toll for Passage via Tollroads and Road Facilities. Procedure for Levy and Review of Toll- Determination of Consumer Demand

ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26-11-10-93: Welded joints. X-Ray TV testing method.

OST 68-16-02: Cartographic instruments. General specifications

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PND F 13.1.2-97: A chromatographic method for measuring the mass concentration of acetone, ethanol, butanol, toluene, ethyl acetate, butyl acetate, isoamylacetate, ethyl cellosolve and cyclohexanone in industrial emissions using a universal disposable sampler.

PND F 13.1.32-02: Quantitative chemical analysis of atmospheric air and air emissions. Gas chromatography method for measuring the mass concentration of esters (ethyl acetate, propyl acetate, butyl acetate, ethyl butyrate, isoamylacetate) in industrial emissions using a universal disposable sampler

PND F 13.1.34-2002: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring mass concentrations of hydrogen sulfide and methyl mercaptan in industrial emissions of enterprises using potentiometric argenometric titration

PND F 13.1.54-2007: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of organic acids (C1 - C6) in industrial emissions into the atmosphere by gas chromatography

PND F 13.1.7-97: Chromatographic method for measuring the mass concentration of benzene, toluene, m-, p-xylene, o-xylene and styrene in industrial emissions using a universal disposable sampler

PND F 13.1:2.22-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the volume fractions of hydrogen, oxygen, nitrogen, methane, oxide and carbon dioxide in the air of the working area and industrial emissions by gas chromatography

PND F 13.1:2.26-99: Methods for measuring mass concentrations of saturated hydrocarbons C1-C5, C6 and higher (total) in the air of the working area and industrial emissions using gas chromatography

PND F 13.1:2:3.23-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of saturated hydrocarbons C1-C5 and unsaturated hydrocarbons (ethene, propene, butenes) in atmospheric air, working area air in industrial emissions by gas chromatography

PND F 13.1:2:3.24-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of hexane, heptane, octane, nonane and decane in atmospheric air, working area air and industrial emissions using gas chromatography

PND F 13.1:2:3.25-99: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of C1-C10 saturated hydrocarbons (total, carbon equivalent), C2-C5 unsaturated hydrocarbons (total, carbon equivalent) and aromatic hydrocarbons (benzene, toluene, ethylbenzene, xylenes, styrene) with their compatible in atmospheric air, working area air in industrial emissions by gas chromatography

PND F 13.1:2:3.27-99: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentrations of carbon monoxide and methane in ambient air, workplace air, and industrial emissions using reaction gas chromatography

PND F 13.1:2:3.59-07: Methods for measuring mass concentrations of saturated hydrocarbons (C12-C19) using a universal disposable sampler in the atmospheric air of the sanitary protection zone, working area air and industrial emissions from the production, storage and transport

PND F 14.1.9-95: Quantitative chemical analysis of water. Methods for measuring the mass concentration of caprolactam in wastewater using gas-liquid chromatography

PND F 14.1:2.230-06: Measurement of mass concentrations of acrylic acid nitrile and acetaldehyde in natural and waste waters using gas chromatography.

PND F 14.1:2:3:4.244-2007: Quantitative chemical analysis of water. Methods of measuring the mass concentration of volatile phenols in drinking, surface, underground fresh and waste waters by gas chromatography

PND F 14.1:2:4.177-02: Quantitative chemical analysis of water. Methods for measuring the mass concentration of phenol in drinking, natural and waste water samples by gas-liquid chromatography

PND F 16.1:2:2.2:3.59-09: Quantitative chemical analysis of soil. Methods for measuring the mass fractions of benzene and toluene in the soil, soils, bottom sediments, production waste and consumption by gas chromatography

PNST 251-2017: Nanomaterials. Nanocomposite material based on polyethylene. Technical requirements and test methods

PNST 68-2015: Multifunction fluorinated composition. Specifications

R 50.2.009-2011: State system for ensuring the uniformity of measurements. Electrocardiographs, electrocardioscopes and electrocardioanalyzers. Verification procedure

R 50.2.041-2004: State system for ensuring uniformity of measurements. Areometers glass. Method of verification

R 50.2.049-2005: State system for ensuring uniformity of measurements. Medical monitors. Method of verification

R 50.2.087-2013: State systems for ensuring the uniformity of measurements. Electroencephalographs, electroencephalscopes and electroencephalanalyzers. Verifacation procedure

R 50-1-86: Reprography. Micrography. Technical control for production and use of microfilms

R 52.24.566-94: Recommendations. Methods of toxicological assessment of pollution of freshwater ecosystems

RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus

RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 153-39.1-059-00: Technique of technical diagnostics of gas control points

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation

RD 32 TsV 052-2005: Repair of freight car trucks

RD 32 TsV 062-99: Typical technological process of the item of technical transfer of wagons as part of the VET station and monitoring the safety of the wagon fleet

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 34.35.619: Pressure Gauges, Vacuum Gauges, and Pressure-and-Vacuum Gauges Type MED, Interchangeable Spring-Loaded with Unified Electrical Output Signal. Guide to Overhaul

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 95 10366-89: Deactivating formulations. Methods for determining quality indicators

RD BGEI 05-89: Metrological support. Collection of sets of calibration tools for geodetic measuring instruments

RD BGEI 37-01: Metrological support. The list of instruments and equipment of the calibration laboratory for cartographic work

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm

SanPiN 1.1.998-00: Hygienic requirements for adult magazines

SanPiN 1.2.1253-03: Hygienic requirements for books for adults

SanPiN 1.2.976-00: Hygienic requirements for adult newspapers

SanPiN 2.4.7.1166-02: Hygienic requirements for educational publications for general and primary vocational education

SanPiN 2.4.7.702-98: The hygiene requirements to textbookfor primary, comprehensivespecialized schools

SanPiN 2.4.7.960-00: Hygienic requirements for book and journal editions for children and teenagers

SanPiN 42-123-4940-88: Microbiological Standards and Methods for Analysis of Children's, Medical and Diet Foods and Their Components

SDOS-01-2008: Methodical recommendations about on the order of radiation control of technical devices and structures applied and operated on hazardous production objects

SP 432.1325800.2019: Fireproof coatings. Condition Monitoring

ST RK 1473-2005: Oil. Method for determination hydrogen sulphide, methyl- and ethyl-mercaptan

ST RK 1647-2007: Railway transport. Magnetic particles method of non-destructive control of car parts

ST RK 2010-2010: Water, soil, fodder and vegetable and animal food products. Determination of 2, 4-D (2, 4-dichlorophenoxyacetic acid) by chromatographic methods

ST RK 2011-2010: Water, food stuffs, feeds and tobacco products. Determination of organochlorine pesticides by chromatographic methods

ST RK 242-92: Blanks for boxes and packs. Boxes and packs. Specification

ST RK GOST R 51577-2003: Liquid oral hygiene products. General specification

ST SSFZhT TsP 107-2001: Crushed stone from natural stone for the ballast layer of the railway track. Typical test method.

ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions

STB 117-93: Souvenir bottles. Specifications

STB 1428-2003: Non-destructive testing. Welded connections of pipes and steel structures. Radiographic method

STB 1736-2007: Liquid means of oral hygiene. General specifications

STB 1886-2008: Cosmetic nail care products. General specifications

STB 1963-2009: Noodles. General specifications

STB GOST R 51756-2002: Aluminum banks of deep drawing with easy-to-open lids. Specifications

STB GOST R 51781-2002: Glass vessels for perfumes and cosmetics. General specifications

STB GOST R 51921-2011: Food products. Methods for the detection and determination of bacteria Listeria monocytogenes

TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TU 035-178-86: Saws disk for pieces of pipes and bent profiles. Technical conditions for the experimental batch

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-4-507-99: Woven with square micron mesh

TU 25-16.0018-84: Magnifier measuring ЛИ-3-10Х

TU 301-05-17-89: Fluoroplast-40

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20219-94: Economizers smooth tube steam stationary boilers. Technical conditions for major repairs

TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs

TU 34-38-20222-94: Steam superheaters of stationary steam boilers. Technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 5913-001-58455567-2004: Low-Emission Glass with Soft Coating

TU 6-05-810-88: Billets of fluoroplast-4 and fluoroplast-4A general purpose. Technical conditions

TU 6-21-12-94: High purity argon

TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions

TU 9462-001-53908805-2006: Glass syringe filling ampoules for medicines

TU 9462-001-84299122-2010: Ampoules medical colorless and brown from glass of the 1st hydrolytic class

TU 9551-014-02570823-02: Cartographic products. Leaf cards

TU 9552-012-02570823-02: Cartographic products. Contour maps

TU 9555-013-02570823-02: Cartographic products. Atlases

TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)

TU 9558-005-02570823-96: Cartographic products. Embossed cards

UO 38.12.007-87: Centrifugal compressors. General technical conditions for repairs

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VNTP 21-92: Standards for technological design of enterprises of the confectionery industry

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94
Hexagon head screws. Product grades A and B
Language: English
Price: $271.56

YOUR ORDERING MADE EASY!

MongoliaLaws.org is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!