MNS

1981

MNS 0012-0-003:1981
MNS 0012-0-003:1981
Industrial hazardous and toxic factors. Category
MNS 0012-4-007:1981
MNS 0012-4-007:1981
Protective fence
MNS 0017:1981
MNS 0017:1981
Estimation of parameters of normal distribution and methods of determination its confidence intervals
MNS 0109:81
MNS 0109:81
MNS 0110:81
MNS 0110:81
MNS 0117:81
MNS 0117:81
MNS 0140:81
MNS 0140:81
MNS 0211:81
MNS 0211:81
MNS 0308:1981
MNS 0308:1981
Nalaykh coals. Technical requirements
MNS 0349:81
MNS 0349:81
MNS 0371:81
MNS 0371:81
MNS 0446:1981
MNS 0446:1981
A pure breed of Persian lamb (caracul) skin. Technical requirements
MNS 0461:1981
MNS 0461:1981
National cookie
MNS 0514:81
MNS 0514:81
MNS 0662:81
MNS 0662:81
MNS 0684:1981
MNS 0684:1981
Livestock for enterprises, warehouses and trade
MNS 0792:81
MNS 0792:81
MNS 0794:1981
MNS 0794:1981
Urotropini 0.25; 0.5 g tablets
MNS 0837:81
MNS 0837:81
MNS 0854:81
MNS 0854:81
MNS 1009:81
MNS 1009:81
MNS 1107:81
MNS 1107:81
MNS 1195:81
MNS 1195:81
MNS 12.0.003:1981
MNS 12.0.003:1981
Occupational Safety. Industrial hazardous and toxic factors. Category.
MNS 12.0.003:81
MNS 12.0.003:81
MNS 12.025:1981
MNS 12.025:1981
MNS 12.4.007:1981
MNS 12.4.007:1981
Protective enclosures
MNS 1275:1981
MNS 1275:1981
Plywood and block board. Determination of density
MNS 1276:1981
MNS 1276:1981
Plywood. Determination of ultimate strength in extend
MNS 1279:1981
MNS 1279:1981
Plywood and block board. Determination of ultimate strength in static bending
MNS 1280:1981
MNS 1280:1981
Plywood. Determination of ultimate strength of glued joint in breaking
MNS 1371:1981
MNS 1371:1981
Normal radius
MNS 1373:81
MNS 1373:81
MNS 1374:1981
MNS 1374:1981
Fundamental norm of reciprocity. Normal linear dimension
MNS 1381:1981
MNS 1381:1981
Complex system of allowance. Angular allowance
MNS 1410:1981
MNS 1410:1981
Unified system of allowance settlement. Straight spline groovy brace
MNS 1411:1981
MNS 1411:1981
Basic norm of reciprocity. Involute cylinder gear transmission. Main sizes. Allowance basic norm. Basic size
MNS 1412:1981
MNS 1412:1981
Groovy involute connection of degree angle. Diameter, module and numbers of pinions /tooth
MNS 1416:1981
MNS 1416:1981
Interchangeable basic norm. Primary frame of small modules lathe for gear
MNS 1417:1981
MNS 1417:1981
Interchangeable basic norm. Primary frame of lathe for gear transmission and cone gears of equal pinions/tooth
MNS 1425:1981
MNS 1425:1981
Tools detruncate Morse cone Basic size. Shortened Morse's cone of tool. Basic size
MNS 1426:1981
MNS 1426:1981
Squares, diameters of tails and square holes for tools. Dimensions and tolerances
MNS 1432:1981
MNS 1432:1981
Cylinder dipper stick twisted drill. Medium lot. Main sizes
MNS 1437:1981
MNS 1437:1981
Milling cutter. Sequence of external diameter
MNS 1478:1981
MNS 1478:1981
Cylinder end of metal milling cutter. Size
MNS 1568:1981
MNS 1568:1981
Cans for preservation
MNS 1570:81
MNS 1570:81
MNS 1573:81
MNS 1573:81

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!